Kakoli M, Davarpanah A, Ahmadi A and Jahangiri MM
A formate-based fluid has been successfully used in many high pressure High temperature (HPHT) well operations since they were introduced in field practice. The laboratory research was carried out to determine composition of formate-base drilling fluid. It was formulated using sodium and potassium formate salts, Carboxymethyl Cellulose (CMC), Polyanionic Cellulose (PAC) and other types of polymers. In this research, the compatibility of different polymers with fluids, including potassium/sodium formate salts is being studied. Having said this, however, polymers, when taken to high temperatures, lose their properties. Therefore, this experimental procedure has been done at a temperature of 250°F over a period of 16 h. For doing these tests, six types of potassium/sodium formate fluids were made by different polymers. All samples formulation regarding their type and amount of water used in preparing fluids and the volume of salts used are simultaneously kept constant. On the contrary, the only differences were the types of polymers used in the different formulations. Formulation of formate-base fluids gives the best rheological properties in terms of AV/PV, YP and shale recovery than other fluids.
PDFShare this article
Journal of Material Sciences & Engineering received 3677 citations as per Google Scholar report
