In this research, the suitability of a vibrating dual bent share cultivator was studied. Therefore, an eccentric pin slider mechanism was designed to vibrate the 2 shanks laterally, employing a tractor power takeoff. this study investigates the sector performance of the vibrating dual bent share cultivator with three different vibration frequencies (0, 0.88, and a couple of Hz) during a clay loam soil at two working depths (100 and 200 mm) and having a water content of a 0.7 or 0.9 plastic limit. rock bottom values of the draught, specific draught, and MWD were recorded at a vibration frequency of two Hz and a working depth of 100 mm. The draught force, specific draught, and MWD of the non-vibration implement were reduced by employing a vibration frequency of two Hz. The coefficient of determination and F values proved that the vibration frequency was simpler than the soil water content and therefore the working depth on the draught, specific draught, and MWD. Although a dual bent share cultivator needs low energy compared with a mould board plough, the vibration of the twin bent share cultivator could also be recommended as an efficient energy demanding implement within the soil manipulation process.
HTML PDFShare this article
Industrial Engineering & Management received 739 citations as per Google Scholar report
