P.O.Box 3030, Irbid 22110
Jordan
Research Article
Treatment of Olive-Mills effluent using Electro-osmosis Dewatering
Author(s): Sameer Al-Asheh, Rami Juma, Fawzi Banat, Amani Al-Zou\'bi and Nesreen Al-QutaishSameer Al-Asheh, Rami Juma, Fawzi Banat, Amani Al-Zou\'bi and Nesreen Al-Qutaish
Direct current is applied to olive mill wastewater effluent which is held between two electrodes in a vertical mode. Wastewater with a total dissolved solid and COD of about 39,300 and 120,000 mg/l, respectively, is used. The effect of pH, voltage, current, and bed height on the dewatering process is investigated. The results, under certain conditions, showed that EOD is an energy saving process for water removal and can be used for treatment of olive mill wastewater. The process revealed high efficiency in reducing COD and total dissolved solid (TDS). Water medium converted from acidic to basic upon application of direct current. Increasing the voltage or the current enhanced the EOD process. Use of additives at certain level also enhanced the dewatering process; addition of alum or electrolyte at certain concentration enhanced the removal rate. Sodium chloride is the most effective .. Read More»
DOI:
10.4172/2157-7587.1000113
Hydrology: Current Research received 2843 citations as per Google Scholar report