Journal of Material Sciences & Engineering

19^th World Congress on Materials Science and Engineering

June 11-13, 2018 | Barcelona, Spain

Posters & Accepted Abstracts

• Electrospraying of active carrier matrix systems with varying hydrophobicities

  Aliyah S Zaman and Zeeshan Ahmad

  PDF HTML

• Hot corrosion behavior of 4.5 wt. % YSZ coatings elaborated by suspension plasma spraying

  Andres Gonzalez-Hernandez Esperanza Lopez and Helene Ageorge

  PDF HTML

• First-principles study on the crystal structure of ZrTi2 under pressure

  Andres Gonzalez-Hernandez and Yhojan Diaz

  PDF HTML

• Lightweight filler for EMI shielding: carbon materials decorated with silvernanoparticle

  Chae Lin Kim and Sang Eun Sim

  PDF HTML

• Protein loading into vaterite CaCO3 crystals by co-synthesis

  Volodkin Dmitry, Jacob Ward, Siani Kempster and Vikulina Anna

  PDF HTML

• Multilayer biopolymer-based capsules made using vaterite CaCO3 crystals

  Volodkin Dmitry, Jack Campbell and Vikulina Anna

  PDF HTML

• Synthesis and properties of porous carbon derived from coffee waste as a supercapacitor electrode

  Eunbeen Na, Minjae Kim, Seokhoon Jang and Sang Eun Shim

  PDF HTML

• Facile synthesis of oxygen defective yolk-shell BiO2-x for visible light-driven photocatalytic inactivation of Escherichia coli

  Hongli Sun, Zhifeng Jiang and Po Keung Wong

  PDF HTML

• Cost-effective polyaminal polymer for the heavy metal removal

  Jihyeong Ryu, Hong-Gyu Seong and Sang Eun Shim

  PDF HTML

• Fibrous NSAID Buccal films

  Kazem Nazari

  PDF HTML

• Ceramic/camphene based three-dimensional co-extrusion for biomimetic structure

  Jong Woo Kim and Young Hak Koh

  PDF HTML

• Effect of carbon-based nanomaterials on flexible polyurethane foaming process and foam fire behavior

  M Pilar Munoz, Almudena Munoz and M Virtudes Navarro

  PDF HTML

• Observations on the effect of forging temperature on the microstructure of super-duplex stainless steel UNS S32760

  Mariana Lucia Angelescu Vasile Danut Cojocaru1 Nicolae Serban, Doina Raducanu, Ion Cinca, Adrian Vintila and Elisabeta Mirela Cojocaru

  PDF HTML

• Development of more sustainable viscoelastic polyurethane foam

  Marta Munoz Marti, Ana Belen Frances Bueno and Virtudes Navarro Banon

  PDF HTML

• Effect of surface treatment on wettability of tetragonal zirconia polycrystals (TZP)

  Masao Yoshinari

  PDF HTML

• Synthesis via hydrothermal route, morphology control, and luminescent properties of rare-earth doped GdPO4 particles

  Matas Janulevicius, Arturas Katelnikovas, and Yurii Orlovskii

  PDF HTML

• Gradually porous bio ceramic scaffolds using ceramic/camphene-based three-dimensional coextrusion

  Min-Kyung Ahn, Jong-Woo Kim and Yong-Hag Koh

  PDF HTML

• Stretchable and flexible thermoelectric polymer composites for self-powered volatile organic compound vapors detection

  Petr Slobodian, Pavel Riha, Robert Olejnik, Jiri Matyas and Nuri Karakurt

  PDF HTML

• Self-sensing of strain in a fiber glass/epoxy composite by built-in stripe of carbon nanotubes with Ag nanoparticles

  Petr Slobodian, Pavel Rihaand Robert Olejnik,Jiri Matyas, Romana Danova and Ralf Schledjewski

  PDF HTML

• Development of electrospun timolol maleate-loaded fibrous nanocoatings for ocular lenses

  Prina Mehta, Ali Al-Kinani, Raid Alany and Zeeshan Ahmad

  PDF HTML

• Electrospun coatings for micron scaled medical devices

  Radeyah Ali and Zeeshan Ahmad

  PDF HTML

• Sonicated decellularised xenograft – a perfect scaffold for cell adhesion

  Swathy R1, Sanjay Cherian, Soosai Manickam and Kootturathu Mammen Cherian

  PDF HTML

• Facile biosensor for detecting norovirus using specific binding probes

  Tae Jung Park, Jong Pil Park, Changsun Choi and Sang Do Ha

  PDF HTML

• Manufacturing of gasket sheet using paper manufacturing process without organic solvent

  Yoonjong Yoo, Hyejeong Lee, Seongmin Park, Seongki Kim and Sanghoon Lee

  PDF HTML

• Pickering emulsion droplets for thermally expandable microcapsule with core-shell structure using β-cyclodextrin

  Ji-Young Jung, Jae Il So and Sang Eun Shim

  PDF HTML

• Polyamide fibers coated with anti-inflammatory drugs

  Gimenez Martin Elena, Rodriguez-Babe Rocio, Campos-Jimenez Daniel and Lopez-Andrade Miguel

  PDF HTML

• Evolution of A201 alloys microstructure during thermal treatment: influence of Si, Ti and B

  S. Abd El Majid, M. Bamberger, A. Katsman

  PDF HTML

• Geoexchanger system for buildings heating and cooling

  Abdeen Omer

  PDF HTML

• Effect of varying La:S molar ratios in Eu3+activated La2O2S synthesized by sol-combustion method

  Abdub G Ali and Deanna L Mulvihill

  PDF HTML

• Optimization of nanostructured FeCrNb hardfacing alloy on stainless steel deposited by PTA process

  Ali Tahaei, Jonathan De Luna , Paul Horley, Younes Javid and Ana Arizmendi Morquecho

  PDF HTML

• Development performance of turbine jet engine

  Hanin N. Al-Kalany

  PDF HTML

• Reinforcement of sand by plastic fibers

  Ari Ali.

  PDF HTML

• Smart &innovative antifouling coatings in industrial applications

  B. Donmez, S. Erkoc Ilter. N.O Sanli and Y. Z. Menceloglu

  PDF HTML

• Effects of sintering temperature on microstructure and mechanical properties of nanostructured Ni17Cr alloy

  B.J. Babalola and M.B. Shongwe

  PDF HTML

• Inclusion characterization for quality control in steelmaking

  Narottam Behera and Ahmad Shahreer

  PDF HTML

• Fabrication of high thermal conductive diamond/copper composites and their joining with substrates

  Cheng-Ying Lee, Yu-Siang Jhong, Yi-An Lai and Su-Jien Lin

  PDF HTML

• The synergistic effect of H2O and DMF towards stable and 20% efficiency inverted perovskite solar cells

  Chun-Guey Wu

  PDF HTML

• Microstructure and mechanical properties of Ti6AI4V /tin prepared by spark plasma sintering technique

  Fikie Madinoge Kgoete

  PDF HTML

• Enhancing of the thermo-physical properties of the insulating non-woven using a polyurethane (PU) coating: An Experimental study of the effect of coating thickness.

  Harem Mohamed EL WAZNA, Omar CHERKAOUI and Abdeslam EL BOUARI

  PDF HTML

• Design and fabrication of portable induction heating

  Harem Noori

  PDF HTML

• Magnetic uniformity of oxide based diluted magnetic semiconductors

  Jiabao Yi

  PDF HTML

• Synthesis, investigation and toxicity of nanocrystalline pow-der of dysprosium oxide

  N. Abdusalyamova and F.A. Makhmudov

  PDF HTML

• Efficient cathode oxygen reduction reaction of fuel cells

  Zhiguang Hu and Yanfang Gao

  PDF HTML

• Surface plasmon effect of silver nanoparticles on optical and photovoltaic properties of silicon solar cells

  Malek Atyaoui, Ben Amara Teyssir ,Wissem Dimassi and Hatem Ezzaouia

  PDF HTML

• Enhancing of the thermo-physical properties of the insulating non-woven using a polyurethane (PU) coating: An Experimental study of the effect of coating thickness

  Mohamed EL WAZNA, Omar CHERKAOUI and Abdeslam EL BOUARI

  PDF HTML

• Microstructure and electrochemical behaviour of ceramic reinforced titanium matrix composites fabricated by spark plasma sintering

  Sifiso Maseko

  PDF HTML

• Wear behaviors of boron-bearing new hardfacing alloys

  Yi-ting Chang, Tien-Hao Chang and Su-Jien Lin

  PDF HTML