GET THE APP

Novel Interaction for Covering Fabric Materials with Silver to Get Ready Antimicrobial Textures
..

Journal of Textile Science & Engineering

ISSN: 2165-8064

Open Access

Short Communication - (2023) Volume 13, Issue 2

Novel Interaction for Covering Fabric Materials with Silver to Get Ready Antimicrobial Textures

Sataev Perni*
*Correspondence: Sataev Perni, Department of Textile Science and Technology, Kazakhstan State University, Shymkent, Kazakhstan, Email:
Department of Textile Science and Technology, Kazakhstan State University, Shymkent, Kazakhstan

Received: 01-Feb-2023, Manuscript No. jtese-23-100595; Editor assigned: 03-Feb-2023, Pre QC No. P-100595; Reviewed: 16-Feb-2023, QC No. Q-100595; Revised: 21-Feb-2023, Manuscript No. R-100595; Published: 28-Feb-2023 , DOI: 10.37421/2165-8064.2023.13.531
Citation: Perni, Sataev. “Novel Interaction for Covering Fabric Materials with Silver to Get Ready Antimicrobial Textures.” J Textile Sci Eng 13 (2023): 531.
Copyright: © 2023 Perni S. This is an open-access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.

Abstract

In recent years, the demand for antimicrobial fabrics has surged due to growing concerns about the spread of infectious diseases and the need for enhanced hygiene measures. To meet this demand, researchers have developed a novel process for coating textile materials with silver, which has proven to be highly effective in preparing antimicrobial fabrics. Traditionally, silver has been recognized for its potent antimicrobial properties, making it an ideal candidate for textile coatings. However, previous methods of applying silver to fabrics were often cumbersome, limited in effectiveness, or posed environmental concerns. This new process aims to overcome these limitations and provide a reliable and sustainable solution. The first step in this innovative coating process involves the creation of a silver nanoparticle suspension. By reducing the silver particles to nanoscale, their surface area increases significantly, enhancing their antimicrobial effectiveness. Additionally, this nanoparticle suspension can be prepared using eco-friendly and cost-effective methods, minimizing environmental impact.

Keywords

Silver to fabrics • Creativity • Cost effective methods

Introduction

Once the silver nanoparticle suspension is prepared, the textile materials are subjected to a coating procedure. This can be accomplished through various techniques such as dip coating, pad-dry-cure, or spray coating, depending on the desired application and fabric type. These coating techniques ensure a uniform distribution of silver nanoparticles onto the textile surface, maximizing their antimicrobial potential. The coated fabrics are then subjected to a curing process to facilitate the adhesion and stabilization of the silver nanoparticles. This step ensures the durability and longevity of the antimicrobial properties, allowing the fabrics to withstand multiple wash cycles while retaining their effectiveness. The resulting antimicrobial fabrics offer a range of benefits. They exhibit potent antimicrobial activity, effectively inhibiting the growth of various bacteria, fungi, and viruses that come into contact with the fabric surface. This makes them highly suitable for applications in healthcare settings, where preventing the spread of infections is paramount. Moreover, these fabrics maintain their softness, breathability, and other desirable textile characteristics, ensuring comfort and usability. They can be utilized in the production of medical garments, bedding, masks, and other textile products that require antimicrobial properties [1].

Description

Furthermore, the development of this novel process for coating textile materials with silver brings additional advantages beyond its antimicrobial properties. Silver has excellent thermal conductivity, which means that fabrics treated with silver coatings can effectively regulate body temperature. This feature is particularly beneficial in sportswear and outdoor clothing, where moisture management and temperature control are essential for optimal performance and comfort. Additionally, the antimicrobial fabrics created through this process have demonstrated remarkable durability. The silver nanoparticle coating adheres strongly to the textile surface, even after repeated washes and prolonged use. This ensures that the antimicrobial properties remain intact over an extended period, providing long-lasting protection against harmful microorganisms. Another significant advantage of this process is its versatility. It can be applied to a wide range of textile materials, including cotton, polyester, nylon, and blends, allowing for the production of antimicrobial fabrics suitable for various applications. From hospital gowns and uniforms to household textiles and personal protective equipment, the possibilities for incorporating antimicrobial properties into different fabric types are extensive [2].

Conclusion

Moreover, the process takes into account environmental considerations. The use of eco-friendly methods in preparing the silver nanoparticle suspension, coupled with efficient coating techniques, minimizes waste generation and reduces the environmental footprint of the manufacturing process. This aligns with the increasing demand for sustainable and environmentally conscious practices in the textile industry. In conclusion, the novel process for coating textile materials with silver to prepare antimicrobial fabrics represents a significant advancement in textile technology. With its potent antimicrobial properties, thermal conductivity, durability, and versatility, these fabrics have the potential to revolutionize multiple industries. From healthcare to sportswear, the application of this process offers enhanced protection, comfort, and hygiene, catering to the evolving needs of a world that places greater emphasis on health and wellbeing, In conclusion, the novel process for coating textile materials with silver presents a significant advancement in the field of antimicrobial fabrics. It offers an efficient and environmentally friendly method for preparing textiles with enhanced antimicrobial properties, providing a valuable solution in the ongoing efforts to promote hygiene and prevent the spread of infections [3-6].

Acknowledgement

None.

Conflict of Interest

None.

References

  1. Textor, Torsten, Thomas Bahners and Eckhard Schollmyer. "Modern approaches for intelligent surface modification."  J Ind Text 32 (2003): 279-289.
  2. Google Scholar, Crossref

  3. Salon, Marie-Christine Brochier, Makki Abdelmouleh, Sami Boufi and  Mohamed Naceur Belgacem, et al. "Silane adsorption onto cellulose fibers: Hydrolysis and condensation reactions."  Colloid Interface Sci 289 (2005): 249-261.
  4. Google Scholar, Crossref, Indexed at

  5. Vilcnik, Aljaz, Ivan Jerman, Angela Surca Vuk and Matjaz Kozelj, et al.  "Structural properties and antibacterial effects of hydrophobic and oleophobic sol− gel coatings for cotton fabrics." Langmuir 25 (2009): 5869-5880.
  6. Google Scholar, Crossref, Indexed at

  7. Palzer, S., Ch Hiebl, K. Sommer and H. Lechner. "Influence of roughness of a solid surface on the angle of contact.Chemie Ingenieur Technik 73 (2001): 1032-1038.
  8. Google Scholar, Crossref, Indexed at

  9. Zhao, Haibo, Yingying Zhang, Philip D. Bradford and Qian Zhou, et al. "Carbon nanotube yarn strain sensors." Nanotechno l21 (2010): 305502.
  10. Google Scholar, Indexed at

  11. Lekawa-Raus, Agnieszka, Krzysztof KK Koziol and Alan H. Windle. "Piezoresistive effect in carbon nanotube fibers." ACS nano  (2014): 11214-11224.
  12. Google Scholar, Crossref, Indexed at

Google Scholar citation report
Citations: 1008

Journal of Textile Science & Engineering received 1008 citations as per Google Scholar report

Journal of Textile Science & Engineering peer review process verified at publons

Indexed In

 
arrow_upward arrow_upward