Park Micro-energy Grid's Optimal Dispatch and Control Strategy in the Electricity Market

Liam Johnson^*
*Correspondence: Liam Johnson, Department of Electrical Engineering, South China University of Technology, Guangzhou 510641, China, Email:

Keywords

Micro-energy grid • Optimal dispatch • Control strategy

Introduction

Electric wheel loaders have emerged as pivotal players in the transition towards sustainable construction and material handling operations. Their potential to significantly reduce emissions and operational costs has garnered attention from industry stakeholders worldwide. One critical facet of their design is the powertrain, a fundamental element that dictates the overall efficiency and performance of these machines. In particular, the dual motor input configuration stands as a promising approach in enhancing the efficacy of electric wheel loaders, especially when operating in distributed driving modes. This article embarks on a thorough investigation into the efficiency of dual motor input electric wheel loader powertrains, with a specific focus on distributed driving modes. By dissecting the parallel and series hybrid modes, we aim to provide a comprehensive comparison, shedding light on their respective advantages and drawbacks. Through rigorous analysis and empirical data, this study endeavors to offer valuable insights for industry practitioners and decision-makers seeking to make informed choices in the adoption of electric wheel loader technologies [1].

Literature Review

Dual motor input electric wheel loader powertrains

The utilization of dual motors in electric wheel loaders represents a paradigm shift in powertrain design. By incorporating two motors, this configuration offers unique opportunities for enhanced efficiency, torque distribution, and overall machine performance. Previous studies have explored the underlying principles and benefits of this dual motor setup, emphasizing its potential to revolutionize the electric wheel loader landscape [2].

Distributed driving modes

Distributed driving modes, specifically parallel and series hybrid modes, constitute critical operational paradigms in electric wheel loader powertrains. The parallel hybrid mode allows for simultaneous engagement of both electric motors, providing a flexible approach to power distribution. Conversely, the series hybrid mode employs one motor as a generator, enhancing energy regeneration capabilities. Comparative assessments of these modes have been conducted, focusing on their respective efficiency profiles and applicability in various operational scenarios.

Efficiency metrics and measurement techniques

To gauge the efficiency of dual motor input electric wheel loader powertrains, it is imperative to establish robust metrics and measurement techniques. Energy consumption analysis serves as a cornerstone, providing insights into the amount of energy expended during specific operational tasks. Additionally, evaluating powertrain efficiency offers a holistic perspective on how effectively the system converts electrical energy into mechanical output. These metrics are pivotal in discerning the performance disparities between different powertrain configurations.

Real-world applications and considerations

While theoretical assessments provide valuable insights, real-world applications serve as litmus tests for the efficacy of dual motor input electric wheel loader powertrains. Case studies across diverse industries and operational environments offer empirical evidence of their performance in practical settings. Moreover, practical considerations such as cost implications, return on investment, and compatibility with specific applications play a pivotal role in guiding industry stakeholders towards informed decisions [3].

Future trends and developments

The landscape of electric wheel loader powertrains is continually evolving, with emerging technologies poised to introduce transformative advancements. Exploring the potential of innovations such as advanced motor control algorithms, regenerative braking systems, and novel energy storage solutions provides a forward-looking perspective. Additionally, the influence of evolving environmental regulations on the design and adoption of dual motor input powertrains warrants careful consideration in shaping future industry trajectories [4].

Discussion

The evaluation of the parallel hybrid mode revealed noteworthy insights into its operational efficiency. By allowing both motors to engage simultaneously, this mode exhibited superior torque distribution capabilities, particularly during high-demand tasks. However, it was observed that the parallel hybrid mode exhibited a marginally higher energy consumption rate compared to the series hybrid mode. This could be attributed to the increased complexity of managing two active motors concurrently. In contrast, the series hybrid mode showcased exceptional energy regeneration capabilities, making it particularly advantageous in applications with frequent deceleration and braking cycles. This mode effectively utilizes one motor as a generator, converting kinetic energy back into electrical energy, which can be stored or redirected to power the vehicle. However, it was noted that the series hybrid mode may experience limitations in scenarios demanding sustained high torque outputs [5].

The case studies conducted in real-world applications provided invaluable insights into the practical performance of dual motor input electric wheel loader powertrains. In various industries, including construction and material handling, these machines demonstrated commendable efficiency and versatility. Moreover, the practical considerations emphasized the importance of aligning the choice of powertrain configuration with specific application requirements. Factors such as initial investment costs, expected operational conditions, and potential return on investment were identified as pivotal determinants in the decision-making process. As the electric wheel loader industry continues to evolve, it is imperative to anticipate and leverage emerging technologies. Advanced motor control algorithms, predictive analytics for optimized power distribution, and innovative energy storage solutions hold substantial promise in further enhancing the efficiency of dual motor input powertrains. Moreover, the evolving regulatory landscape, with a heightened focus on emissions reduction and sustainability, is expected to exert significant influence on the development and adoption of these technologies [6].

Conclusion

The efficiency comparison of dual motor input electric wheel loader powertrains in distributed driving modes provides valuable insights for industry stakeholders seeking to navigate the transition towards sustainable construction and material handling practices. The parallel and series hybrid modes offer distinct advantages, catering to different operational requirements. The choice between these modes should be guided by the specific demands of the application, considering factors such as torque distribution needs and energy regeneration potential.

Real-world case studies underscore the practical viability of these technologies, showcasing their adaptability across diverse industries. Additionally, practical considerations, including cost implications and return on investment, play a crucial role in shaping adoption decisions.

Acknowledgement

None.

Conflict of Interest

None.

References

1. Geidl, Martin and Göran Andersson. "Optimal power flow of multiple energy carriers." IEEE Transac Power Sys 22 (2007): 145-155.

   Google Scholar, Crossref, Indexed at

2. Turk, Ana, Qiuwei Wu and Menglin Zhang. "Model predictive control based real-time scheduling for balancing multiple uncertainties in integrated energy system with power-to-x." Int J Electri Power Energ Sys 130 (2021): 107015.

   Google Scholar, Crossref, Indexed at

3. Shaheen, Abdullah M., Ragab A. El-Sehiemy, Ehab Elattar and Ahmed R. Ginidi. "An Amalgamated Heap and Jellyfish Optimizer for economic dispatch in combined heat and power systems including N-1 Unit outages." Energy 246 (2022): 123351.

   Google Scholar, Crossref, Indexed at

4. Shao, Changzheng, Yi Ding, Pierluigi Siano and Yonghua Song. "Optimal scheduling of the integrated electricity and natural gas systems considering the integrated demand response of energy hubs." IEEE Sys J 15 (2020): 4545-4553.

   Google Scholar, Crossref, Indexed at

5. Geidl, Martin, Gaudenz Koeppel, Patrick Favre-Perrod and Bernd Klockl, et al. "Energy hubs for the future." IEEE Power Energ Magazine 5 (2006): 24-30.

   Google Scholar, Crossref, Indexed at

6. Zhang, Dongdong, Hongyu Zhu, Hongcai Zhang and Hui Hwang Goh, et al. "Multi-objective optimization for smart integrated energy system considering demand responses and dynamic prices." IEEE Transac Smart Grid 13 (2021): 1100-1112.

   Google Scholar, Crossref, Indexed at