NazimCicek
Scientific Tracks Abstracts: J Material Sci Eng
Medium chain-length polyhydroxyalkanoates (mcl-PHAs) are a class of polymers synthesized by certain species of
bacteriaas an energy storage mechanism. These polymers have shown promise as a potential renewable alternative
to conventional petroleum-based plastics and fuels. Use of an inexpensive and renewable carbon source such as biodiesel
waste glycerol and free fatty acids is a requisite for cost-effective mcl-PHA production. Under certain operating conditions,
Pseudomonas putida LS46 has been shown to be capable of robust growth on these substrates while achieving relatively high
cellular mcl-PHA content. Preliminary tests in reactors with a 3-5L working volume have shown that for growth on substrates
metabolized via β-oxidation pathways (pure octanoic acid, biodiesel waste fatty acids), the application of oxygen limitation
(>0.01 mg/L O2) improved the cellular PHA content from 45% to 71% using pure octanoic acid, and from 17% to 35% using
biodiesel waste fatty acids as compared to conventional nitrogen limitation. The improvement in cellular PHA content using
oxygen limitation compensated for the slowed growth rate, resulting in a higher overall mcl-PHA productivity. For growth
on waste glycerol, nitrogen limitation was found to be more effective than oxygen limitation, resulting in 25% cellular PHA
content. For all substrates, fed batch strategies have been used to reliably achieve biomass yields of 12-15 g/L, in a reactor with
working volumes up to 50 L. Further improvements to cell density and overall productivity may be achievable through the
design and operation of continuous or semi-continuous feed bioreactors.
NazimCicek completed his PhD in 1999 in Environmental Engineering at the University of Cincinnati. His research interests include biological wastewater treatment,
membrane bioreactors, nutrient recovery from waste streams, anaerobic digestion of livestock manure, and biological conversion of renewable waste materials into
biofuels and bio-products. These interests have resulted in more than 85 peer-reviewed publications.
Journal of Material Sciences & Engineering received 3677 citations as per Google Scholar report